Dell PowerConnect 3348 User's Guide - Page 349
DSCP In, Queue, DSCP Mapping, Apply Changes, Assigning DSCP Values Using the CLI Commands
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
DSCP Mapping Page The For the list of the DSCP default queue settings, contains the following fields: NOTE: In a stacking configuration, Queue 4 is used for forwarding stacking traffic. Therefore, assigning additional traffic to Queue 4 may interfere with stack control. • DSCP In-Indicates the values of the DSCP field within the incoming packet. • Queue-Indicates the queue to which packets with the specific DSCP value are assigned. The values are 1-4, where one is the lowest and four is the highest value. Mapping a DSCP value and assigning priority queue: 1 Open the DSCP Mapping page. 2 Select a value in the DSCP In column. 3 Define the Queue fields. 4 Click Apply Changes. The DSCP is not overwritten, and the value is assigned a forwarding queue. Assigning DSCP Values Using the CLI Commands The following table summarizes the equivalent CLI commands for configuring fields in the DSCP Mapping page. Configuring Quality of Ser vice 349