Dell PowerConnect 3348 User's Guide - Page 32
Device Rack Installation, Installing the Switch without a Rack, Installing PowerConnect 3324/3348
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
www.dell.com | support.dell.com 6 Inspect the product for damage. Report any damage immediately. For information about contacting Dell, see "Getting Help". Device Rack Installation CAUTION: Disconnect all cables from the unit before mounting the PowerConnect 3324/3348 switch in a rack or cabinet. Installing PowerConnect 3324/3348: 1 Ground yourself by putting on an ESD wrist strap and attaching the ESD clip to a metal surface. 2 Place the PowerConnect 3324/3348 switch on a flat and stable surface. 3 Place the supplied rack-mounting bracket on one side of the PowerConnect 3324/3348. Ensure that the mounting holes on the PowerConnect 3324/3348 line up with the mounting holes on the rack-mounting bracket. 4 Insert the supplied screws into the rack-mounting holes and tighten with a Phillips screwdriver. 5 Repeat the process for the rack-mounting bracket on the other side of PowerConnect 3324/3348. 6 Insert the unit into the 19-inch rack and secure the unit to the rack with the rack screws (not provided by the PowerConnect 3324/3348 supplier). When securing, fasten the lower pair of screws before the upper pair of screws to ensure that the weight of the unit is evenly distributed during installation. Ensure that the ventilation holes are not obstructed. Installing the Switch without a Rack The PowerConnect 3324/3348 must be installed on a flat surface if it is not installed on a rack. The surface must be able to support the weight of the device and the device cables. 1 Set PowerConnect 3324/3348 on a flat surface, leaving 2 inches on each side and 5 inches at the back. 2 Ensure that the device has proper ventilation. 3 Attach the rubber feet to the bottom of the device to prevent the device from slipping. 32 I n s t a llin g t h e Po we rC on n e c t 3324/3348 Sw itc h