Dell PowerConnect 3348 User's Guide - Page 172
Select Recipient IP, SNMP Trap Settings
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
www.dell.com | support.dell.com SNMP Trap Settings Page The SNMP Trap Settings page contains the following fields: • SNMP Trap-Enables sending SNMP traps or SNMP notifications from the switch to defined trap recipients. The possible field values are: - Enable-Enables sending SNMP traps or SNMP notifications. - Disable-Stops all SNMP traps from being sent. • Authentication Trap-Enables sending SNMP traps when authentication fails to defined recipients. The possible field values are: - Enable-Enables sending SNMP traps when authentication failed. - Disable-Disables sending SNMP traps when authentication failed. • Select Recipient IP-Specifies the IP address to whom the traps are sent. • Traps -Determines the trap type sent to the selected recipient. The possible field values are: - SNMP V1-Indicates SNMP Version 1 traps are sent. - SNMP V2c-Indicates SNMP Version 2 traps are sent. - Disable-Disables sending traps to the recipient. • Community String-Identifies the community string of the trap manager. • Remove-Removes Trap Manager Table entries. 172 Configuring System Infor mation