Dell PowerConnect 3348 User's Guide - Page 272

www.dell.com | support.dell.com CLI Command show gvrp configuration [ethernet interface | portchannel port-channelnumber] gvrp max-vlan number Description Displays GVRP configuration information, including timer values, whether GVRP and dynamic VLAN creation is enabled, and which ports are running GVRP. Configures the maximum number of VLANs when GVRP is enabled. The following is an example of the CLI commands: Console (config)# gvrp enable Console (config)# interface ethernet 1/e8 Console (config-if)# gvrp enable Console (config-if)# gvrp-vlan-creation-forbid Console (config-if)# gvrp registration-forbid Console# show gvrp configuration GVRP Feature is currently enabled on the switch. Maximum VLANs: 256, Maximum VLANs after reset: 256. Port(s)StatusRegistrationDynamic VLANTimers (milliseconds) CreationJoinLeaveLeave All 2/1EnabledNormalEnabled20060010000 4/4EnabledNormalEnabled20060010000 Aggregating Ports Port Aggregation optimizes port usage by linking a group of ports together to form a single Link Aggregated Group (LAG). Port Aggregation multiplies the bandwidth between the devices, increases port flexibility, and provides link redundancy. Both the PowerConnect 3324 and PowerConnect 3348 support up to six LAGs, and eight ports per LAG per stack or stand-alone unit. Each LAG is composed of ports of the same speed, set to full-duplex operations. Ports in a LAG, can be of different media types (UTP/Fiber, or different fiber types), provided they operate at the same speed. 272 Configuring Switch Infor mation