Dell PowerConnect 3348 User's Guide - Page 132
IP Interface, Show All, IP Interface Table, Remove, Apply Changes, IP Interface Parameters
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
www.dell.com | support.dell.com IP Inter face Table Page Deleting IP addresses: 1 Open the IP Interface page. 2 Click Show All. The IP Interface Table page opens. 3 Select an entry in the IP Interface Table. 4 Check the Remove check box to remove IP addresses. 5 Click Apply Changes. The IP address is deleted, and the device is updated. Defining IP Interfaces Using CLI Commands The following table summarizes the equivalent CLI commands for viewing fields displayed in the IP Interface Parameters page. CLI Command ip address ip-address {mask | prefixlength} no ip address [ip-address] show ip interface [ethernet interface-number | vlan vlan-id | port-channel number] Description Sets an IP address. Removes an IP address Displays the usability status of interfaces configured for IP. The following is an example of the CLI commands: Console (config)# interface vlan 1 Console (config-if)# ip address 131.108.1.27 255.255.255.0 Console (config-if)# no ip address 131.108.1.27 Console (config-if)# exit Console# show ip interface vlan 1 132 Configuring System Infor mation