Dell PowerConnect 3348 User's Guide - Page 224
Storm Control, Show All, Storm Control Settings Table, Displaying the Port Parameters Table
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
www.dell.com | support.dell.com Displaying the Port Parameters Table: 1 Open the Storm Control page . 2 Click Show All. The Storm Control Settings Table opens. Storm Control Settings Table Configuring Storm Control with CLI Commands The following table summarizes the equivalent CLI commands for configuring storm control as displayed in the Storm Control page. CLI Command port storm-control enable {unknown | broadcast | multicast} {fastethernet | gigaethernet interface} port storm-control rate gigaethernet interface rate. show ports storm-control Description Enables broadcast storm control for Unicast, Multicast, and Broadcast packets. Configures the maximum broadcast rate. Displays the storm control configuration. The following is an example of the CLI commands: Console(config)# port storm-control rate fastethernet 300 Console(config)# port storm-control enable fastethernet Console# show ports storm-control PortUnknownBroadcastMulticastRate 224 Configuring Switch Infor mation