Dell PowerConnect 3348 User's Guide - Page 234

www.dell.com | support.dell.com • Address Table Sort Key-Specifies the method by which the Dynamic Address Table is sorted. The possible field values are: - Address-Sorts the query results for a designated MAC address. - VLAN-Sorts the query results by VLAN ID. - Interface-Sorts the query results by interface, and displays all MAC addresses that have been learned on the designated port. The Query Results Table contains the following columns: • VLAN ID-Indicates the VLAN Tag value. • MAC-Indicates the MAC address. • Port-Indicate the port that is attached to the dynamic MAC address. • Type-Indicates the MAC address type. Redefining the Aging Time: 1 Open the Dynamic Address Table. 2 Define the Aging Time field. 3 Click Apply Changes. The aging time is modified, and the device is updated. Querying the Dynamic Address Table: 1 Open the Dynamic Address Table. 2 Define the parameter by which to query the Dynamic Address Table. The Dynamic Address Table entries can be queried by interface, MAC Address, or VLAN. 3 Click Query. The Dynamic Address Table is queried. The query results are sorted by the selected Address Table Sort Key field value. Querying and Sorting Dynamic Addresses Using CLI Commands The following table summarizes the equivalent CLI commands for querying and sorting dynamic addresses as displayed in the Dynamic Address Table page. CLI Command bridge aging-time seconds Description Sets the address table aging time. 234 Configuring Switch Infor mation