Dell PowerConnect 3348 User's Guide - Page 35
Cable, Port, and Pinout Information
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Connecting PowerConnect 3324/3348 to a Power Supply • Plug in the PowerConnect 3324/3348 to one of the previously listed power sources. AC Power Connection AC power should be supplied to the unit through a 1.5m (5 foot) standard power cable with safety-ground connected. To connect power to PowerConnect 3324/3348: 1 Connect the power cable to the AC main socket located on the rear panel. If there is a redundant power module, connect this redundant power module cable to a separate power supply. 2 Connect the power cable to a grounded AC outlet. 3 Confirm that the device is connected and operating correctly by examining the LEDs on the front panel. For more information about LEDs, see "LED Definitions". Cable, Port, and Pinout Information This section describes the PowerConnect 3324/3348 physical interfaces and provides information about cable connections. Stations are connected to PowerConnect 3324/3348 ports through the physical interface ports on the front panel. For each station, the appropriate mode (Half/Full Duplex, Auto) is set. Installing the PowerConnect 3324/3348 Switch 35