Dell PowerConnect 3348 User's Guide - Page 218
Enables Auto Negotiation on the LAG. Auto-negotiation
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
www.dell.com | support.dell.com • Current LAG Status-Specifies the LAG status. The possible field values are: - Up-Indicates the LAG is currently operating. - Down-Indicates the LAG is currently non-operational. • Admin Auto Negotiation-Enables Auto Negotiation on the LAG. Auto-negotiation is a protocol between two link partners that enables a LAG to advertise its transmission rate, duplex mode, and flow control (the flow control default is disabled) abilities to its partner. The possible field values are: - Enable-Enables auto negotiation on the LAG. - Disable-Disables auto negotiation on the LAG. • Current Auto Negotiation-Indicates the current Auto Negotiation setting. The possible field values are: - Enable - Disable • Admin Speed-Indicates the speed at which the LAG is operating. This value can be entered only if the LAG is disabled. The possible field values are: - 10M - 100M - 1000M • Current LAG Speed-Specifies the synchronized LAG speed in bps. The possible field values are: - 10M - 100M - 1000M • Current Duplex Mode-Specifies the LAG conversation type. The current field values are: - Full-The interface supports transmission between the device and the client in both directions simultaneously. - Half-The interface supports transmission between the device and the client in only one direction at a time. • Admin Current Duplex Mode-Specifies the LAG conversation type. The current field values are: - Full-The interface supports transmission between the device and the client in both directions simultaneously. 218 Configuring Switch Infor mation