Dell PowerConnect 3348 User's Guide - Page 207

3 Define the interface to which the ACL is attached in the Attach ACL to an Interface field. 4 Click Apply Changes. The ACL is attached to the interface. Assigning ACL Membership Using the CLI Commands The following table summarizes the equivalent CLI commands for assigning ACL membership as displayed in the ACL Bindings page. CLI Command class-map class-map-name [match-all | match-any] match access-group ACL name show class-map [class-mapname] Description Creates class maps and enters the classmap configuration mode. Defines the match criterion to classify traffic. Displays all the class maps configured on the device. The following is an example of the CLI commands: Console (config)# class-map class1 match-any Console (config-cmap)# match access-group dell Console (config-cmap)# exit Console (config)# exit Console # exit Console> show class-map class1 Class Map match-any class1 (id4) Configuring Ports This section provides an explanation and instruction for configuring port functionality including advanced features, such as Storm Control and Port Mirroring. To open the Ports page: • Select Switch > Ports. The Ports page opens. Configuring Switch Infor mation 207