Dell PowerConnect 3348 User's Guide - Page 280

www.dell.com | support.dell.com CLI Command channel-group port-channelnumber mode {on | auto} show interface port_channel Description Configures a port to a Port channel. Displays the interfaces attached to a LAG. The following is an example of the CLI commands: Console# channel-group port-channel-number mode on auto 1 Port-Channel 1:Port Type 1000 Ethernet Actor System Priority:1 MAC Address: 000285:0E1C00 Admin Key: 29 Oper Key: 29 Partner System Priority:0 MAC Address: 000000:000000 Oper Key: 14 Multicast Forwarding Support Multicast forwarding allows a single packet to be forwarded to multiple destinations. L2 Multicast service is based on a L2 switch receiving a single packet addressed to a specific multicast addresses. Multicast forwarding creates copies of the packet, and transmits the packets to the relevant ports. PowerConnect 3324/3348 supports both: • Forwarding L2 Multicast Packets-Enabled by default. • Filtering L2 Multicast Packets-Enables forwarding L2 packets to ports VLAN. If multicast filtering is disabled, multicast packets are flooded to all relevant VLAN ports. 280 Configuring Switch Infor mation