Dell PowerConnect 3348 User's Guide - Page 30
Installation Precautions, Site Requirements
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
www.dell.com | support.dell.com Installation Precautions CAUTION: The rack or cabinet housing the switch should be adequately secured to prevent it from becoming unstable and/or falling over. CAUTION: Ensure the power source circuits are properly grounded. CAUTION: Observe and follow service markings. Do not service any product except as explained in your system documentation. Opening or removing covers marked with a triangular symbol with a lighting bolt may cause electrical shock. These components are to be serviced by trained service technicians only. CAUTION: Ensure the power cable, extension cable, and/or plug is not damaged. CAUTION: Ensure the product is not exposed to water. CAUTION: Do not push foreign objects into the device, as it may cause a fire or electric shock. CAUTION: Allow the product to cool before removing covers or touching internal equipment. CAUTION: Ensure the switch does not overload the power circuits, wiring, and over-current protection. To determine the possibility of overloading the supply circuits, add together the ampere ratings of all switches installed on the same circuit as the switch. Compare this total with the rating limit for the circuit. The maximum ampere ratings are usually printed on the switch, near their AC power connectors. NOTICE: Ensure the device is not exposed to radiators and/or heat sources. NOTICE: Ensure the cooling vents are not blocked. NOTICE: Use the device only with approved equipment. NOTICE: Do not install the switch in an environment where the operating ambient temperature might exceed 40ºC (122ºF). NOTICE: Ensure the air flow around the front, sides, and back of the switch is not restricted. Site Requirements Dell™ PowerConnect™ 3324/3348 series equipment can be mounted in a standard 19-inch equipment rack or placed on a table. Before installing the unit, verify that the location chosen for installation meets the site requirements described below. • General-Ensure that the power supply is correctly installed. 30 I n s t a llin g t h e Po we rC on n e c t 3324/3348 Sw itc h