Dell PowerConnect 3348 User's Guide - Page 247
STP Port Settings, Priority, Path Cost, Default Path Cost, Fast Link, Apply Changes
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
Modifying STP Port Properties: 1 Open the STP Port Settings page. 2 Modify the Priority, Path Cost, Default Path Cost, and the Fast Link fields. 3 Click Apply Changes. The STP port parameters are modified, and the device is updated. STP Port Table Page Defining STP Port Parameters Using CLI Commands The following table summarizes the equivalent CLI commands for defining STP port parameters as displayed in the STP Port Settings page. CLI Command spanning-tree disable spanning-tree cost cost spanning-tree portpriority priority show spanning-tree [ethernet interface | port-channel port-channel-number] spanning-tree portfast Description Disables spanning tree on a specific port. Configures the spanning tree port cost for a port. Configures port priority. Displays spanning tree configuration. Enables PortFast mode. The following is an example of the CLI commands: Console(config)# interface ethernet 1/e5 Console(config-if)# spanning-tree disable Configuring Switch Infor mation 247