Dell PowerConnect 3348 User's Guide - Page 266
Ingress Filtering, Enable, Disable, VLAN LAG Settings, Port Mode, Frame Type, Apply Changes, Show All
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
www.dell.com | support.dell.com • Ingress Filtering-Enables ingress filtering by the LAG. Ingress filtering discards packets which do not include an ingress port. The possible field values are: - Enable-Enables ingress filtering by the LAG. - Disable-Disable ingress filtering by the LAG. Assigning LAG settings: 1 Open the VLAN LAG Settings page. 2 Define the Port Mode, PVID, Frame Type, and the Ingress Filtering fields. 3 Click Apply Changes. The VLAN LAG parameters are defined, and the device is updated. Displaying the VLAN LAG Table: 1 Open the VLAN LAG Settings page. 2 Click Show All. The VLAN LAG Table opens. VLAN LAG Table Assigning LAGs to VLAN Groups Using CLI Commands The following table summarizes the equivalent CLI commands for assigning LAGs to VLAN groups as displayed in the VLAN LAG Settings page. CLI Command switchport mode {access | LAG | general} switchport LAG native vlan vlan-id Description Configures a port VLAN membership mode. Defines the LAG as a member of the specified VLAN, and the VLAN ID as the "port default VLAN ID (PVID)". 266 Configuring Switch Infor mation