Dell PowerConnect 3348 User's Guide - Page 286
Managing Multicast Service Members Using CLI Commands, service members as displayed in
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
www.dell.com | support.dell.com Assigning LAGs to receive multicast service: 1 Open the Bridge Multicast page. 2 Define the VLAN ID and the Bridge Multicast Address fields. 3 Toggle the LAG to S to join the LAG to the selected multicast group, or toggle a port to F to forbid the port from joining a multicast group. 4 Click Apply Changes. The LAG is assigned to the multicast group, and the device is updated. Managing Multicast Service Members Using CLI Commands The following table summarizes the equivalent CLI commands for managing multicast service members as displayed in the Bridge Multicast Group page. CLI Command bridge multicast address {macmulticast-address | ipmulticast-address} {add | remove} {ethernet interfacelist | port-channel portchannel-number-list} show bridge multicast address-table [vlan vlan-id] [address macmulticast-address | ipmulticast-address] [format ip | mac] Description Registers MAC-layer multicast addresses to the bridge table, and adds static ports to the group. Displays multicast MAC address table information. The following is an example of the CLI commands: Console (config)# interface vlan 8 bridge multicast address 0100.5e02.0203 bridge multicast address 0100.5e02.0203 add ethernet 1/e1, 2/e2 Console (config-if)# Exit Console # show bridge multicast address-table Vlan MAC Address typePorts 286 Configuring Switch Infor mation