Dell PowerConnect 3348 User's Guide - Page 173
Adding a new Trap Recipient, Recipient IP Address, Community String
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
- Checked-Removes the Trap Manager Table entry. - Unchecked-Maintains the Trap Manager Table entry. Enabling SNMP Traps on the device: 1 Open the SNMP Trap Settings page. 2 Select Enable in the SNMP Trap drop-down list. 3 Define the Select Recipient IP, Traps, and Community String fields. 4 Click Apply Changes. SNMP traps are enabled on the device. Enabling Authentication Traps on the device: 1 Open the SNMP Trap Settings page. 2 Select Enable in the Authentication Trap drop-down list. 3 Define the Select Recipient IP, Traps, and Community String fields. 4 Click Apply Changes. Authentication traps are enabled on the device. Adding a new Trap Recipient: 1 Open the SNMP Trap Settings page. 2 Click Add. The Add Trap Receiver/Manager page opens. Add Trap Receiver/Manager Page 3 Define the Recipient IP Address, Community String, and Trap Enable fields. (Note that 0.0.0.0 means "All", and the traps are broadcast.) 4 Click Apply Changes. the Trap Recipient/Manager is added, and the device is updated. Configuring System Infor mation 173