Dell PowerConnect 3348 User's Guide - Page 71
Under Windows click, Start>Run, Telnet
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Once Access is granted, command usage is the same as in direct device management: 1 Under Windows click Start>Run and enter the command cmd. The standard windows command line interface is displayed. 2 Enter the command Telnet and the device IP address. Microsoft Windows 2000 [Version 5.00.2195] (C) Copyright 1985-2000 Microsoft Corp. C:\>telnet 50.1.1.2 01-Jan-2000 02:40:23 %MSCM-I-NEWTERM: New TELNET connection from 50.1.1.2 User Name:Dell Password:**** console# show ip interface Gateway IP Address Activity status 50.1.1.100 inactive IP Address I/F 50.1.1.1/8 vlan 1 console# Configuring the PowerConnect 3324/3348 Switch 71
Configuring the PowerConnect 3324/3348 Switch
71
Once Access is granted, command usage is the same as in direct device management:
1
Under Windows click
Start>Run
and enter the command cmd. The standard
windows command line interface is displayed.
2
Enter the command
Telnet
and the device IP address.
Microsoft Windows 2000 [Version 5.00.2195]
(C) Copyright 1985-2000 Microsoft Corp.
C:\>
telnet
50.1.1.2
01-Jan-2000 02:40:23 %MSCM-I-NEWTERM: New TELNET connection from
50.1.1.2
User Name:Dell
Password:****
console#
show ip interface
Gateway IP Address
Activity status
----------------------- -----------------------
50.1.1.100
inactive
IP Address
I/F
----------------------- ----------------------
50.1.1.1/8
vlan 1
console#