Dell PowerConnect 3348 User's Guide - Page 278

www.dell.com | support.dell.com Configuring LACP Parameters Using CLI Commands The following table summarizes the equivalent CLI commands for configuring LACP parameters as displayed in the Link Aggregation page. CLI Command lacp system-priority value lacp port-priority value lacp timeout {long | short} show lacp ethernet interface [parameters | statistics | protocol-state] show lacp port-channel [port_channel_number] Description Configures the system priority. Configures the priority value for physical ports. Assigns an administrative LACP timeout. Displays LACP information for ethernet ports. Displays LACP information for a Portchannel. The following is an example of the CLI commands: Console (config)# lacp system-priority 120 Console (config)# interface ethernet 1/e8 Console (config-if)# lacp port-priority 247 Console (config-if)# lacp timeout long Console (config-if)# exit Console# show lacp ethernet 1/e1 statistics Port 1/e1 LACP Statistics: LACP PDUs sent:2 LACP PDUs received:2 278 Configuring Switch Infor mation