Dell PowerEdge T410 Hardware Owner's Manual - Page 120
Installing a RAID Battery, place. See
View all Dell PowerEdge T410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Figure 3-15. Removing and Installing the RAID Battery 1 2 3 6 5 4 1 RAID battery 3 battery carrier tabs 5 battery carrier 2 battery cable connector 4 battery carrier slots (2) 6 battery carrier release tab Installing a RAID Battery 1 Insert the RAID battery into the battery carrier. See Figure 3-15. 2 Align the tabs on the battery carrier with the battery carrier slots on the chassis. 3 Slide the battery carrier into the battery carrier slots until it locks into place. See Figure 3-15. 4 Connect the battery cable to the connector on the storage card and replace the storage controller card. See "Installing an Expansion Card" on page 115. 5 Hold the touch points and lower the expansion card stabilizer. 6 Close the system. See "Closing the System" on page 91. 7 Place the system upright and on its feet on a flat, stable surface. 120 Installing System Components