Dell PowerEdge T410 Hardware Owner's Manual - Page 91
Closing the System, See - parts
View all Dell PowerEdge T410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Figure 3-5. Opening and Closing the System 2 3 1 4 1 cover release latch 3 system cover 2 cover release latch lock 4 system feet (4) Closing the System 1 Ensure that all internal cables are connected and folded out of the way. 2 Ensure that no tools or extra parts are left inside the system. 3 Align the cover with the slots in chassis and lower the cover into the chassis. See Figure 3-5. 4 Press the cover into the chassis until the latch locks into place. 5 Turn the lock on the cover release latch clockwise to the locked position. See Figure 3-5. 6 Place the system upright and on its feet on a flat, stable surface. 7 Rotate the system feet outward. Installing System Components 91
Installing System Components
91
Figure 3-5.
Opening and Closing the System
Closing the System
1
Ensure that all internal cables are connected and folded out of the way.
2
Ensure that no tools or extra parts are left inside the system.
3
Align the cover with the slots in chassis and lower the cover into the
chassis. See Figure 3-5.
4
Press the cover into the chassis until the latch locks into place.
5
Turn the lock on the cover release latch clockwise to the locked position.
See Figure 3-5.
6
Place the system upright and on its feet on a flat, stable surface.
7
Rotate the system feet outward.
1
cover release latch
2
cover release latch lock
3
system cover
4
system feet (4)
4
3
1
2