Dell PowerEdge T410 Hardware Owner's Manual - Page 49

Table 1-3. System Messages (continued) Message Causes Corrective Actions Memory set to minimum frequency. The memory frequency may If not an intentional setting, be intentionally set lower for check any other system power conservation. messages for possible causes. The current memory configuration may support only the minimum frequency. Ensure that your memory configuration supports the higher frequency. See "General Memory Module Installation Guidelines" on page 106. Memory tests terminated by keystroke. POST memory test was terminated by pressing the spacebar. Information only. MEMTEST lane failure detected on x Invalid memory configuration. Mismatched memory modules are installed. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 106. Mirror mode The memory configuration Reconfigure the memory disabled. For mirror mode, does not match the setting in modules for Memory BIOS. The BIOS setting has Mirroring mode. See DIMMs must be installed in been disabled. "System Memory" on page 106. pairs. Pairs must be matched in size and geometry. About Your System 49