Dell PowerEdge T410 Hardware Owner's Manual - Page 41

Table 1-2. LCD Status Messages (continued) Code Text Causes Corrective Actions W1627 Power required The system configuration Turn off power to the > PSU wattage. requires more power than system, reduce the Check PSU and what the power supply can hardware configuration or config. provide. install higher-wattage power supplies, and then restart the system. W1628 Performance The system configuration Turn off power to the degraded. requires more power than system, reduce the Check PSU and what the power supply can hardware configuration or system provide, but it can boot if install higher-wattage configuration. throttled. power supplies, and then restart the system. NOTE: For the full name of an abbreviation or acronym used in this table, see the "Glossary" on page 187. Solving Problems Described by LCD Status Messages The code and text on the LCD can often specify a very precise fault condition that is easily corrected. For example, if the code E1418 CPU_1_Presence appears, you know that a microprocessor is not installed in socket 1. In contrast, you might be able to determine the problem if multiple related errors occur. For example, if you receive a series of messages indicating multiple voltage faults, you might determine that the problem is a failing power supply. Removing LCD Status Messages For faults associated with sensors, such as temperature, voltage, fans, and so on, the LCD message is automatically removed when that sensor returns to a normal state. For example, if temperature for a component goes out of range, the LCD displays the fault; when the temperature returns to the acceptable range, the message is removed from the LCD. For other faults, you must take action to remove the message from the display: About Your System 41