Dell PowerEdge T410 Hardware Owner's Manual - Page 70
PCI IRQ Assignment Screen, Serial Communication Screen - manual
View all Dell PowerEdge T410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
PCI IRQ Assignment Screen Option Description Use the and keys to manually select an IRQ for a given device, or select Default to allow the BIOS to select an IRQ value at system startup. Serial Communication Screen Option Description Serial Communication (On without Console Redirection default) Options are On without Console Redirection, On with Console Redirection via COM1, On with Console Redirection via COM2, and Off. Serial Port Address Specifies the address of the serial ports External Serial Connector Specifies whether Serial Device1, Serial Device2, or (Serial Device1 default) Remote Access Device has access to the external serial connector. Failsafe Baud Rate (115200 default) Displays the failsafe baud rate used for console redirection. This rate should not be adjusted. Remote Terminal Type Options are VT100/VT220 or ANSI. (VT100/VT220 default) Redirection After Boot (Enabled default) Enables or disables BIOS console redirection after the operating system boots. 70 Using the System Setup Program and UEFI Boot Manager