Dell PowerEdge T410 Hardware Owner's Manual - Page 50
See Getting Help on, Using the System Setup - key
View all Dell PowerEdge T410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Table 1-3. System Messages (continued) Message Causes Corrective Actions No boot device available Faulty or missing optical drive subsystem, hard drive, or hard-drive subsystem, or no bootable USB key installed. Use a bootable USB key, optical drive, or hard drive. If the problem persists, see "Troubleshooting an Optical Drive" on page 165, "Troubleshooting a USB Device" on page 156, and "Troubleshooting a Hard Drive" on page 167. See "Using the System Setup Program and UEFI Boot Manager" on page 61 for information on setting the order of boot devices. No boot sector on hard drive Incorrect configuration settings in System Setup program, or no operating system on hard drive. Check the hard-drive configuration settings in the System Setup program. See "Using the System Setup Program and UEFI Boot Manager" on page 61. If necessary, install the operating system on your hard drive. See your operating system documentation. No timer tick interrupt Faulty system board. See "Getting Help" on page 185. PCIe Training Faulty or improperly Error: Expected installed PCIe card in the Link Width is x, specified slot. Actual Link Width is y. Reseat the PCIe card in the specified slot number. See "Troubleshooting Expansion Cards" on page 169. If the problem persists, see "Getting Help" on page 185. 50 About Your System