Dell PowerEdge T410 Hardware Owner's Manual - Page 93
Installing the Cooling Shroud, Place the system upright and on its feet on a flat, stable surface.
View all Dell PowerEdge T410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Figure 3-6. Removing and Installing the Cooling Shroud 1 2 3 4 1 expansion card stabilizer touch points (2) 3 cooling shroud 2 expansion card stabilizer 4 cooling shroud touch points (2) Installing the Cooling Shroud 1 Align the cooling shroud with the alignment guides in the system. 2 Hold the touch points on the cooling shroud and carefully lower the cooling shroud into the system. Ensure that no cables are pinned under the edges of the cooling shroud. 3 Hold the touch points and lower the expansion card stabilizer. 4 Close the system. See "Closing the System" on page 91. 5 Place the system upright and on its feet on a flat, stable surface. 6 Rotate the system feet outward. 7 Reattach any peripherals, then connect the system to the electrical outlet. 8 Turn on the system and attached peripherals. Installing System Components 93