Dell PowerEdge T430 Dell PowerEdge T430 Owners Manual - Page 122
Installing the power supply unit blank, Replacing the power supply divider
View all Dell PowerEdge T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Figure 51. Removing and installing the power supply blank 1. power supply blank 2. power supply bay Installing the power supply unit blank Install the power supply unit blank only in the second power supply unit bay. To install the power supply unit blank, align the blank with the power supply unit bay and push it into the chassis until it clicks into place. Replacing the power supply divider Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals. 2. Remove the redundant power supply module(s) or power supply blank as applicable. Steps 1. Remove the screw securing the power-supply divider to the chassis. 2. Slide out the power-supply divider and turn it clockwise to free the tabs on the power-supply divider from the slots on the power supply unit cage . 3. Slide the power-supply divider out of the chassis. 4. Align the tabs of the new power-supply divider with the slots of the power supply unit cage . 5. Turn the power-supply divider counter-clockwise and slide it in until the power-supply divider is seated on the slots of the power supply unit cage . 122