Dell PowerEdge T430 Dell PowerEdge T430 Owners Manual - Page 41
System Security Settings screen, Number of Turbo Boost Enabled Cores for Processor 2
View all Dell PowerEdge T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Menu Item Description Number of Turbo Boot Enabled Cores for Processor 1 NOTE: If there are two processors installed in the system, you see an entry for Number of Turbo Boost Enabled Cores for Processor 2. Controls the number of turbo boost enabled cores for processor 1. By default, the maximum number of cores is enabled. Monitor/Mwait Enables the Monitor/Mwait instructions in the processor. By default, the Monitor/Mwait option is set to Enabled for all system profiles, except Custom. NOTE: This option can be disabled only if the C States option in Custom mode is disabled. NOTE: When C States is enabled in Custom mode, changing the Monitor/Mwait setting does not impact system power/performance. System Security Settings screen You can use the System Security screen to perform specific functions such as setting the system password, setup password and disabling the power button. To view the System Security click System Setup Main Menu → System BIOS → System Security Settings. Menu Item Intel AES-NI System Password Setup Password Password Status TPM Security TPM Information TPM Status TPM Command Description Improves the speed of applications by performing encryption and decryption using the Advanced Encryption Standard Instruction Set and is set to Enabled by default. Sets the system password. This option is set to Enabled by default and is read-only if the password jumper is not installed in the system. Sets the setup password. This option is read-only if the password jumper is not installed in the system. Locks the system password. By default, the Password Status option is set to Unlocked. NOTE: The TPM menu is available only when the TPM module is installed. Allows you to control the reporting mode of the Trusted Platform Module (TPM). By default, the TPM Security option is set to Off. You can only modify the TPM Status, TPM Activation , and Intel TXT fields if the TPM Status field is set to either On with Pre-boot Measurements or On without Pre-boot Measurements. Changes the operational state of the TPM. By default, the TPM Activation option is set to No Change. Displays the TPM status. CAUTION: Clearing the TPM results in the loss of all keys in the TPM. The loss of TPM keys may affect booting to the operating system. Clears all the contents of the TPM. By default, the TPM Clear option is set to No. 41