Dell PowerEdge T430 Dell PowerEdge T430 Owners Manual - Page 51
Removing the front bezel, System feet, Removing the system feet
View all Dell PowerEdge T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
3. bezel key 5. bezel tab (2) 4. slot on the chassis (2) 6. bezel Removing the front bezel 1. Unlock the bezel using the bezel keys. 2. Press the release latch at the top of the bezel. 3. Pull the top end of the bezel away from the system. 4. Remove the bezel by unhooking the bezel tabs from the slots at the bottom of the system. System feet The system feet provide stability to the system in the tower mode. Removing the system feet Prerequisites NOTE: It is recommended that you remove the system feet only when you are converting the system from the tower mode to the rack mode, or when you are replacing the system feet with the wheel assembly. 1. Ensure that you read the Safety instructions. 2. Keep the #2 Phillips screwdriver ready. 3. Turn the system feet inward. 4. Lay the system on its side on a flat and stable surface. Steps Remove the screws securing the system feet to the base of the tower. 51