Dell PowerEdge T430 Dell PowerEdge T430 Owners Manual - Page 53
Caster wheels (optional)—tower mode, Installing caster wheels
View all Dell PowerEdge T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Next steps Place the system upright on a flat and stable surface, and turn the system feet outward. Related Links Removing the system feet Caster wheels (optional)-tower mode Caster wheels provide mobility to the system in the tower mode. The caster wheel assembly consists of: • Caster wheel units (front and back) • Two screws for the caster wheel units Installing caster wheels Prerequisites 1. Ensure that you read the Safety instructions. 2. Keep the #2 Phillips screwdriver ready. 3. Lay the system on its side on a flat and stable surface with the base of the system extending off the edge of the surface. 4. If installed, remove the system feet. Steps 1. Align the two retention hooks on the back wheel unit with the two slots on the base of the chassis, and insert the hooks into the slots. 2. Offset the back wheel to the back of the system and secure the unit in place using a single screw. 3. Align the two retention hooks on the front wheel with the two slots on the base of the chassis and insert the hooks into the slots. 4. Offset the front wheel to the front and secure the unit in place using a screw. 53