Dell PowerEdge T430 Dell PowerEdge T430 Owners Manual - Page 138
Removing the VGA module, VGA module
View all Dell PowerEdge T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
3. Install the control panel assembly. 4. Connect the control panel cable, the LCD cable and the control panel USB cable to the system board. 5. Follow the procedure listed in After working inside your system. Related Links Installing the control panel assembly cover Installing the control panel assembly Removing the LCD module Removing the VGA module Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Ensure that you read the Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. Remove the control panel assembly. 4. Remove the control panel assembly cover. Steps Release the hooks securing the VGA module to the control panel board and remove the VGA module. Figure 63. Removing and installing the VGA module 1. VGA module 3. hook (2) Related Links Removing the control panel assembly 2. control panel 4. VGA connector on the control panel board 138