Dell PowerEdge T430 Dell PowerEdge T430 Owners Manual - Page 139
Installing the VGA module, System board, Removing the system board
View all Dell PowerEdge T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Removing the control panel assembly cover Installing the VGA module Installing the VGA module Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. Ensure that you read the Safety instructions. Steps 1. Align the slots on the VGA module with the VGA connector and hooks on the control panel board. 2. Press down on the VGA module until the hooks snap into place. 3. Install the control panel assembly cover. 4. Install the control panel. Next steps 1. Install the control panel assembly cover. 2. Install the control panel assembly. 3. Follow the procedure listed in After working inside your system. Related Links Installing the control panel assembly cover Installing the control panel assembly Preparing a system for conversion from tower mode to rack mode Removing the VGA module System board Removing the system board Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Ensure that you read the Safety instructions. 2. Keep the #2 Phillips screwdriver ready. 3. Follow the procedure listed in Before working inside your system. 139