Dell PowerEdge T430 Dell PowerEdge T430 Owners Manual - Page 131
Installing the control panel assembly, To install the information tag
View all Dell PowerEdge T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Figure 57. Removing and installing the information tag 1. information tag 3. slot 2. tab (2) Related Links Preparing a system for conversion from tower mode to rack mode Installing the control panel assembly Installing the control panel assembly Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Ensure that you read the Safety instructions. 2. Keep the #2 Phillips screwdriver ready. Steps 1. Replace the blank information tag in the new control panel with the information tag retained from the old control panel. NOTE: Information tag lists system information such as Service Tag, NIC, MAC address, and so on. 2. To install the information tag, push the information tag into the control-panel slot. 3. Connect the control panel cable and the control panel USB cable to the control panel module. 4. Align and insert the control panel into the control panel slot in the chassis. 5. Secure the control panel to the chassis using the screw. 6. Connect the control panel cable and the control panel USB cable to the system board. 131