Dell PowerEdge T430 Dell PowerEdge T430 Owners Manual - Page 99
Expansion card installation guidelines, PCIe Slot, Processor Connection, Height, Length, Link Width
View all Dell PowerEdge T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Expansion card installation guidelines Table 3. PCI Express Generation 3 expansion cards supported PCIe Slot Processor Connection Height Length 1 Platform Controller Full Height Half Length Hub 2 Platform Controller Full Height Half Length Hub 3 Processor 1 Full Height Full Length 4 Processor 1 Full Height Full Length 5 Processor 2 Full Height Half Length 6 Processor 2 Full Height Half Length Link Width x4 Slot Width x8 x1 x1 x16 x16 x16 x16 x8 x8 x8 x8 NOTE: Only slots 3, 4, 5, and 6 support Generation 3 PCIe expansion cards. NOTE: Do not use slots 5 and 6 for single processor configuration (CPU1). NOTE: When your system is installed with a double-width GPU card in slot 3, you cannot install an expansion card in slot 2. NOTE: When your system is installed with a double-width GPU card in slot 4, you cannot install an expansion card in slot 3. NOTE: The expansion cards are not hot-swappable. The following table provides a guide for installing expansion cards to ensure proper cooling and mechanical fit. The expansion cards with the highest priority must be installed first using the slot priority indicated. All other expansion cards must be installed following the card priority and slot priority order. Table 4. Expansion card installation order Card Priority Card Type Slot Priority 1 GPU 4 GPU (AMD W7000) 3, 4 2 RAID 3, 4 RAID (H830) 3, 4, 5, 6 3 10 Gb NICs 3, 4, 5, 6, 1 4 FC8 HBA 3, 4, 5, 6, 1 5 1 Gb NICs 3, 4, 5, 6, 1 1 Gb NIC (Broadcom Dual Port) 3, 4, 5, 6, 1, 2 6 Non-RAID 3, 4, 5, 6 Maximum Allowed 1 2 2 4 5 5 5 6 4 99