Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 110

show lacp interface Displays information about specific LACP interfaces. Syntax Parameters Default Command Mode Usage Information Example show lacp interface ethernet node/slot/port node/slot/port - Enter the interface information. Not configured EXEC The LACP_activity field displays if you configure the link in Active or Passive port-channel mode. The Port Identifier field displays the port priority as part of the information including the port number. For example, Port Identifier=0x8000,0x101, where the port priority value is 0x8000 and the port number value is 0x101. OS10# show lacp interface ethernet 1/1/129 Invalid Port id, Max. Port Id is: 32 OS10# show lacp interface ethernet 1/1/29 Interface ethernet1/1/29 is up Channel group is 1 port-channel is po1 PDUS sent: 365 PDUS rcvd: 17 Marker sent: 0 Marker rcvd: 0 Marker response sent: 0 Marker response rcvd: 0 Unknown packetse rcvd: 0 Illegal packetse rcvd: 0 Local Port: ethernet1/1/29 MAC Address=90:b1:1c:f4:9b:8a System Identifier=32768,32768 Port Identifier=32768,32768 Operational key=1 LACP_Activity=passive LACP_Timeout=Long Timeout(30s) Synchronization=IN_SYNC Collecting=true Distributing=true Partner information refresh timeout=Long Timeout(90s) Actor Admin State=BCFHJKNO Actor Oper State=BDEGIKNO Neighbor: 178 MAC Address=00:00:00:00:00:00 System Identifier=,00:00:00:00:00:00 Port Identifier=0,00:01:e8:8a:fd:9e Operational key=1 LACP_Activity=passive LACP_Timeout=Long Timeout(30s) Synchronization=IN_SYNC Collecting=true Distributing=true Partner Admin State=BCEGIKNP Partner Oper State=BDEGIKMO Supported Releases 10.2.0E or later show lacp neighbor Displays information about LACP neighbors. Syntax show lacp neighbor [interface port-channel channel-number] 110 Layer 2