Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 299
log-adjacency-changes, maximum-paths, redistribute
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 299 highlights
log-adjacency-changes Enables logging of syslog messages about changes in the OSPFv3 adjacency state. Syntax log-adjacency-changes Parameters None Default Disabled Command Mode ROUTER-OSPFv3 Usage Information The no version of this command resets the value to the default. Example OS10(config)# router ospfv3 100 OS10(config-router-ospfv3-100)# log-adjacency-changes Supported Releases 10.3.0E or later maximum-paths Enables forwarding of packets over multiple paths. Syntax Parameters Default Command Mode Usage Information Example maximum-paths number number -Enter the number of paths for OSPFv3 (1 to 128). Disabled ROUTER-OSPFv3 The no version of this command resets the value to the default. OS10(config)# router ospfv3 OS10(config-router-ospfv3-100)# maximum-paths 1 Supported Releases 10.3.0E or later redistribute Redistributes information from another routing protocol or routing instance to the OSPFv3 process. Syntax redistribute {bgp as-number | connected | static} [route-map route-map name] Parameters • as-number - Enter an autonomous number to redistribute BGP routing information throughout the OSPFv3 instance (1 to 4294967295). • route-map name - Enter the name of a configured route-map. • connected - Enter the information from connected (active) routes on interfaces to redistribute. • static - Enter the information from static routes on interfaces redistribute. Defaults Command Mode Usage Information Example Not configured ROUTER-OSPFv3 When an OSPFv3 redistributes, the process is not completely removed from the BGP configuration. The no version of this command disables the redistribute configuration. OS10(config)# router ospfv3 100 OS10(config-router-ospfv3-100)# redistribute bgp 4 route-map dell1 Layer 3 299