Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 270
clear ip ospf process, default-information originate, default-metric, fast-converge
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
clear ip ospf process Clears all OSPF routing tables. Syntax clear ip ospf {instance-number} process Parameters instance-number - Enter an OSPF instance number (1 to 65535). Default Not configured Command Mode EXEC Usage Information This command clears all entries in the OSPF routing table. Example OS10# clear ip ospf 3 process Supported Releases 10.2.0E or later default-information originate Generates and distributes a default external route information to the OSPF routing domain. Syntax default-information originate [always] Parameters always - (Optional) Always advertise the default route. Defaults Disabled Command Mode ROUTER-OSPF Usage Information The no version of this command disables the distribution of default route. Example OS10(config)# router ospf 10 OS10(config-router-ospf-10)# default-information originate always Supported Releases 10.3.0E or later default-metric Assigns a metric value to redistributed routes for the OSPF process. Syntax default-metric number Parameters number - Enter a default-metric value (1 to 16777214). Default Not configured Command Mode ROUTER-OSPF Usage Information The no version of this command disables the default-metric configuration. Example OS10(conf-router-ospf-10)# default-metric 2000 Supported Releases 10.2.0E or later fast-converge Sets the minimum LSA origination and arrival times to zero (0) allowing more rapid route computation so that convergence takes less time. Syntax fast-converge convergence-level 270 Layer 3