Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 233
show ip bgp, show ip bgp dampened-paths, Example IPv4, Supported Releases, Syntax, Parameters, Default
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
Example (IPv4) OS10(conf-router-bgp-102)# neighbor 3.3.3.1 OS10(conf-router-neighbor)# address-family ipv4 unicast OS10(conf-router-bgp-neighbor-af)# sender-side-loop-detection Example (IPv6) OS10(conf-router-bgp-102)# neighbor 32::1 OS10(conf-router-neighbor)# address-family ipv6 unicast OS10(conf-router-bgp-neighbor-af)# no sender-side-loop-detection Supported Releases 10.3.0E or later show ip bgp Displays information that BGP neighbors exchange. Syntax Parameters Default Command Mode Usage Information Example show ip bgp ip-address/mask ip-address/mask - Enter the IP address and mask in A.B.C.D/x format. Not configured EXEC This command displays BGP neighbor information. OS10# show ip bgp 1.1.1.0/24 BGP routing table entry for 1.1.1.0/24 Paths: (1 available, table Default-IP-Routing-Table.) Received from : 3.1.1.1(3.3.3.33) Best AS_PATH : 100 Next-Hop : 3.1.1.1, Cost : 0 Origin INCOMPLETE, Metric 0, LocalPref 100, Weight 0, confed-external Route-reflector origin : 0.0.0.0 Supported Releases 10.3.0E or later show ip bgp dampened-paths Displays BGP routes that are dampened (non-active). Syntax show ip bgp dampened-paths Parameters None Default Not configured Command Mode EXEC Usage Information • Network - Displays the network ID to which the route is dampened. • From - Displays the IP address of the neighbor advertising the dampened route. • Reuse - Displays the HH:MM:SS until the dampened route is available. • Path - Lists all AS the dampened route passed through to reach the destination network. Example OS10# show ip bgp dampened-paths BGP local router ID is 80.1.1.1 Layer 3 233
![](/manual_guide/products/dell-powerswitch-s5148fon-os10-enterprise-edition-user-guide-release-1032er2-5350827/233.png)