Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 441
Interface policy-map
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 441 highlights
Create policy-map P1 for class C1 OS10(config)# policy-map p1 OS10(conf-pmap-qos)# class c1 OS10(conf-pmap-c-qos)# set qos-group 1 Show policy-map OS10(conf-pmap-c-qos)# do show policy-map Service-policy(qos) input: p1 Class-map (qos): c1 set qos-group 1 Interface policy-map You can apply policy-maps directly to interfaces. 1 To attach a policy-map to in CONFIGURATION mode, enter interface mode. interface ethernet node/slot/port:[subport] 2 Configure an input or output service-policy in INTERFACE mode. service-policy {[input type {qos}] | [output type {queuing}]} policy-map-name Attach policy-map OS10(conf)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# service-policy input type qos p1 OS10(conf-if-eth1/1/1)# service-policy output type queuing p2 View policy-map OS10(conf-if-eth1/1/1)# do show policy-map Service-policy (qos) input: p1 Class-map (qos): c1 set qos-group 1 Service-policy (queuing) output: p2 Class-map (qos): c2 set qos-group 2 OS10(conf-if-eth1/1/1)# do show policy-map Service-policy(qos) input: pmap1 Class-map(qos): class-trust trust dot1p View QoS interface configuration OS10(conf-if-eth1/1/1)# do show qos interface ethernet 1/1/1 Interface ethernet 1/1/1 unknown-unicast-storm-control : Disabled multicast-storm-control : Disabled broadcast-storm-control : Disabled flow-control-rx : Disabled flow-control-tx : Disabled Service-policy (Input)(qos): p1 Service-policy (Output)(queuing): p2 OS10(conf-if-eth1/1/1)# do show qos interface ethernet 1/1/1 Interface unknown-unicast-storm-control : Disabled multicast-storm-control : Disabled broadcast-storm-control : Disabled flow-control-rx : Disabled flow-control-tx : Disabled ets mode : Disabled Quality of service 441