Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 55

show ipv6 management-route Displays the IPv6 routes used to access the management port. Syntax show ipv6 management-route [all | connected | summary | static] Parameters • all - (Optional) Display the IPv6 routes that the management interface uses. • connected - (Optional) Display only routes directly connected to the management interface. • summary - (Optional) Display the number of active and non-active management routes and their remote destinations. • static - (Optional) Display non-active management routes. Default Command Mode Usage Information Example Not configured EXEC Use this command to view the IPv6 static routes configured for the management port. Use the management route command to configure an IPv4 or IPv6 management route. OS10# show ipv6 management-route Destination ----------2001:34::0/64 2001:68::0/64 Gateway ------ManagementEthernet 1/1 2001:34::16 State ----Connected Active Supported Releases 10.2.2E or later show license status Displays license status information. Syntax Parameters Default Command Mode Usage Information Example show license status None Not configured EXEC Use this command to view the show license status command to verify the current license for running OS10, its duration, and the service tag of the switch to which it is assigned. OS10# show license status System Information Vendor Name : Dell EMC Product Name : S5148F-ON Hardware Version: X01 Platform Name : x86_64-dellemc_s5100_c2538-r0 PPID : CN0X4XRXCES007980029 Service Tag : 9CLSG02 License Details Software : OS10-Enterprise Version : 10.3.2E(X) License Type : EVALUATION Getting Started 55