Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 256
Open shortest path first, first
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
Parameters • all-(Optional) Displays all routes including nonactive routes. • bgp-(Optional) Displays BGP route information. • connected-(Optional) Displays only the directly connected routes. • static-(Optional) Displays all static routes. • A::B/mask-(Optional) Enter the IPv6 destination address and mask. • summary-(Optional) Displays the IPv6 route summary. Default Command Mode Usage Information Example (All) Not configured EXEC None OS10# show ipv6 route all Codes: C - connected S - static B - BGP, IN - internal BGP, EX - external BGP O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2, E1 - OSPF external type 1, E2 - OSPF external type 2, > - non-active route Gateway of last resort is not set Destination Gateway Dist/Metric Last Change Example (Connected) OS10# show ipv6 route connected Codes: C - connected S - static B - BGP, IN - internal BGP, EX - external BGP O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2, E1 - OSPF external type 1, E2 - OSPF external type 2, > - non-active route Gateway of last resort is not set Destination Gateway Dist/Metric Last Change C 2001:db86::/32 via 2001:db86:fff::1 ethernet1/1/1 0/0 00:03:24 Example (Summary) OS10# show ipv6 route summary Route Source Active Routes Ospf 0 Bgp 0 Connected 0 Static 0 Ospf Inter-area 0 NSSA External-1 0 NSSA External-2 0 Ospf External-1 0 Ospf External-2 0 Bgp Internal 0 Bgp External 0 Ospf Intra-area 0 Total 0 Non-Active Routes 0 0 0 0 0 0 0 0 0 0 0 0 0 Supported Releases 10.2.0E or later Open shortest path first OSPF routing is a link-state routing protocol that allows sending of link-state advertisements (LSAs) to all other routers within the same autonomous system (AS) area. Information about attached interfaces, metrics used, and other attributes are included in OSPF LSAs. OSPF routers accumulate link-state information, and use the shortest path first (SPF) algorithm to calculate the shortest path to each node. 256 Layer 3
![](/manual_guide/products/dell-powerswitch-s5148fon-os10-enterprise-edition-user-guide-release-1032er2-5350827/256.png)