Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 347
show ntp associations, show ntp status
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 347 highlights
Supported Releases 10.2.0E or later show ntp associations Displays the NTP master and peers. Syntax Parameters Default Command Mode Usage Information show ntp associations None Not configured EXEC • (none) - One or more of the following symbols displays: - * - Synchronized to this peer. - # - Almost synchronized to this peer. - + - Peer was selected for possible synchronization. - - - Peer is a candidate for selection. - ~ - Peer is statically configured. • remote - Remote IP address of the NTP peer. • ref clock - IP address of the remote peer's reference clock. • st - Peer stratum (number of hops away from the external time source). 16 means that the NTP peer cannot reach the time source. • when - Last time the device received an NTP packet. • poll - Polling interval (in seconds). • reach - Reachability to the peer (in octal bitstream). • delay - Time interval or delay for a packet to complete a round-trip to the NTP time source (in milliseconds). • offset - Relative time of the NTP peer's clock to the network device clock (in milliseconds). • disp - Dispersion. Example OS10# show ntp associations remote ref clock st when poll reach delay offset disp 10.10.120.5 0.0.0.0 16 - 256 0 0.00 0.000 16000.0 *172.16.1.33 127.127.1.0 11 6 16 377 -0.08 -1499.9 104.16 172.31.1.33 0.0.0.0 16 - 256 0 0.00 0.000 16000.0 192.200.0.2 0.0.0.0 16 - 256 0 0.00 0.000 16000.0 Supported Releases 10.2.0E or later show ntp status Displays NTP configuration information. Syntax show ntp status Parameters status - (Optional) View the NTP status. Default Not configured Command Mode EXEC System management 347