Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 300
router-id, router ospfv3, show ipv6 ospf
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
Example (Connected) OS10((config-router-ospfv3-100)# redistribute connected route-map dell2 Supported Releases 10.3.0E or later router-id Configures a fixed router ID for the OSPFv3 process. Syntax router-id ip-address Parameters ip-address - Enter the IP address of the router as the router ID. Default Not configured Command Mode ROUTER-OSPFv3 Usage Information Configure an arbitrary value in the IP address format for each router. Each router ID must be unique. Use the fixed router ID for the active OSPFv3 router process. Changing the router ID brings down the existing OSPFv3 adjacency. The new router ID becomes effective immediatley. The no version of this command disables the router ID configuration. Example OS10(config)# router ospfv3 10 OS10(config-router-ospfv3-100)# router-id 10.10.1.5 Supported Releases 10.3.0E or later router ospfv3 Enters Router OSPFv3 mode and configures an OSPFv3 instance. Syntax Parameters Default Command Mode Usage Information Example router ospfv3 instance-number instance-number-Enter a router OSPFv3 instance number, from 1 to 65535. Not configured CONFIGURATION The no version of this command deletes an OSPFv3 instance. OS10(config)# router ospfv3 10 Supported Releases 10.3.0E or later show ipv6 ospf Displays OSPFv3 instance configuration information. Syntax show ipv6 ospf [instance-number] Parameters instance-number - (Optional) View OSPFv3 information for a specified instance number (1 to 65535) Default None Command Mode EXEC Usage Information None Example OS10# show ipv6 ospf Routing Process ospfv3 200 with ID 1.1.1.1 It is an Area Border Router Min LSA origination 5000 msec, Min LSA arrival 1000 msec 300 Layer 3