Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 229
next-hop-self, non-deterministic-med, outbound-optimization
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Example OS10(conf-router-bgp-2)# neighbor 32.1.0.0 OS10(conf-router-neighbor)# Supported Releases 10.3.0E or later next-hop-self Disables the next-hop calculation for a neighbor. Syntax Parameters Default Command Mode Usage Information Example next-hop-self None Enabled ROUTER-NEIGHBOR-AF Influences next-hop processing of EBGP routes to IBGP peers. The no version of this command disables the nexthop calculation. OS10(conf-router-neighbor-af)# next-hop-self Supported Releases 10.3.0E or later non-deterministic-med Compares paths in the order they arrive. Syntax Parameters Default Command Mode Usage Information Example non-deterministic-med None Disabled ROUTER-BGP Paths compare in the order they arrive. OS10 uses this method to choose different best paths from a set of paths, depending on the order they are received from the neighbors. MED may or may not be compared between adjacent paths. When you change the path selection from deterministic to non-deterministic, the path selection for the existing paths remains deterministic until you use the clear ip bgp command to clear the existing paths. The no version of this command configures BGP bestpath selection as non-deterministic. OS10(conf-router-bgp-10)# non-deterministic-med Supported Releases 10.2.0E or later outbound-optimization Enables outbound optimization for IBGP peer-group members. Syntax outbound-optimization Parameters None Default Not configured Command Mode ROUTER-BGP Layer 3 229