Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 123

1 Adjust the TTL value in CONFIGURATION mode. lldp holdtime-multiplier 2 Return to the default multiplier value in CONFIGURATION mode. no lldp holdtime-multiplier Configure TTL OS10(config)# lldp holdtime-multiplier 2 Return multiplier value OS10(config)# no lldp holdtime-multiplier LLDP commands clear lldp counters Clears LLDP and LLDP-MED transmit, receive, and discard statistics from all the physical interfaces. Syntax Parameters Default Command Mode Usage Information Example clear lldp counters None Not configured EXEC The counter default value resets to zero for all physical interfaces. OS10# clear lldp counters Supported Releases 10.2.0E or later clear lldp table Clears LLDP neighbor information for all interfaces. Syntax Parameters Default Command Mode Usage Information Example clear lldp table None Not configured EXEC Neighbor information clears on all interfaces. OS10# clear lldp table Supported Releases 10.2.0E or later lldp enable Enables or disables LLDP globally. Syntax lldp enable Layer 2 123