Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 40
Common commands, alias
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
- no untagged • Port-channel Interface mode: - channel-member - no channel-member • Enable the feature to configure commands in an OS9 environment in CONFIGURATION mode. OS10(config)# feature config-os9-style OS10(config)# exit OS10# show running-configuration compressed interface breakout 1/1/28 map 10g-4x feature config-os9-style • Once this feature is enabled, you cannot use the OS10 format of commands in the new session. OS10(config)# interface vlan 11 OS10(conf-if-vl-11)# tagged ethernet 1/1/15 OS10(conf-if-vl-11)# show configuration ! interface vlan11 no shutdown tagged ethernet 1/1/15 Common commands alias Creates a command alias. Syntax alias alias-name alias-value Parameters Default Command Mode • alias-name - Enter the name of the alias (up to 20 characters). • alias-value - Enter the command to be executed within double quotes (1 to 9 or *). Enter the $ followed by either numbers ranging from 1 to 9 or with an asterisk (*) and enter the parameters while executing the commands using the alias. Use asterisk (*) to represent any number of parameters. Not configured EXEC CONFIGURATION Usage Information Example Use this command to create a shortcut to long commands along with arguments. Use the numbers 1 to 9 along with the $ to provide input parameters. The no version of this command deletes an alias. OS10# alias showint "show interface $*" OS10# showint status Port Description Status Speed Duplex Mode Vlan Tagged-Vlans Eth 1/1/1 up 40G A 1 - Eth 1/1/2 up 40G A 1 - Eth 1/1/3 up 40G A 1 - Eth 1/1/4 up 40G A 1 - Eth 1/1/5 up 40G A 1 - Eth 1/1/6 up 40G A 1 - Eth 1/1/7 up 40G A 1 - 40 Getting Started