Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 96
X commands, dot1x host-mode
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Port Auth Status: Re-Authentication: Tx Period: Quiet Period: Supplicant Timeout: Server Timeout: Re-Auth Interval: Max-EAP-Req: Host Mode: Auth PAE State: Backend State: UNAUTHORIZED Enable 120 seconds 120 seconds 45 seconds 60 seconds 3600 seconds 5 MULTI_HOST Initialize Initialize View interface running configuration OS10(conf-range-eth1/1/7-1/1/8)# do show running-configuration interface ... ! interface ethernet1/1/7 no shutdown dot1x max-req 5 dot1x re-authentication dot1x timeout quiet-period 120 dot1x timeout re-authperiod 3600 dot1x timeout server-timeout 60 dot1x timeout supp-timeout 45 dot1x timeout tx-period 120 ! interface ethernet1/1/8 no shutdown dot1x max-req 5 dot1x re-authentication dot1x timeout quiet-period 120 dot1x timeout re-authperiod 3600 dot1x timeout server-timeout 60 dot1x timeout supp-timeout 45 dot1x timeout tx-period 120 ... 802.1X commands dot1x host-mode Allows 802.1X authentication for either a single supplicant or multiple supplicants on an interface. Syntax dot1x host-mode {multi-host | multi-auth} Parameters • multi-host - Allows attachment of multiple hosts to a single 802.1X-enabled port. You can only authorize one of the attached clients for all clients to grant network access. If the port becomes unauthorized (reauthentication fails or receives an EAPOL-logoff message), the device denies network access to all of the attached clients. • multi-auth - Allows 802.1X authentication for each connected host. Default Command Mode Usage Information Example Multi-host INTERFACE The no version of this command resets the value to the default. OS10(conf-range-eth1/1/7-1/1/8)# dot1x host-mode multi-auth 96 Layer 2