Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 276

max-metric router-lsa Configures OSPF to advertise a maximum metric on a router so that it is not desired as an intermediate hop from other routers. Syntax max-metric router-lsa Parameters None Default Not configured Command Mode ROUTER-OSPF Usage Information Routers in the network do not prefer other routers as the next intermediate hop after they calculate the shortest path. The no version of this command disables maximum metric advertisement configuration. Example OS10(conf-router-ospf-10)# max-metric router-lsa Supported Releases 10.2.0E or later maximum-paths Enables forwarding of packets over multiple paths. Syntax maximum-paths number Parameters number -Enter the number of paths for OSPF (1 to 128). Default 64 Command Mode ROUTER-OSPF Usage Information The no version of this command resets the value to the default. Example OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# maximum-paths 1 Supported Releases 10.2.0E or later redistribute Redistributes information from another routing protocol or routing instance to the OSPFv2 process. Syntax Parameters redistribute {bgp as-number| connected | static} [route-map map-name] • as-number - Enter an autonomous number to redistribute BGP routing information throughout the OSPF instance (1 to 4294967295). • connected - Enter the information from connected (active) routes on interfaces to redistribute. • static - Enter the information from static routes on interfaces redistribute. • route-map name - Enter the name of a configured route-map. Defaults Command Mode Usage Information Example Not configured ROUTER-OSPF When an OSPF redistributes, the process is not completely removed from the BGP configuration. The no version of this command disables the redistribute configuration. OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# redistribute bgp 4 route-map dell1 276 Layer 3