Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 367

boot system Sets the boot partition to use during the next reboot. Syntax Parameters boot system {active | standby} • active - Reset the running partition as the next boot partition. • standby - Set the standby partition as the next boot partition. Default Command Mode Usage Information Example Active EXEC Use this command to configure the location of the OS10 image used to reload the software at boot time. Use the show boot command to view the configured next boot image. This command is applied immediately and does not require the commit command. OS10# boot system standby Supported Releases 10.2.0E or later image cancel Cancels an active image download. Syntax Parameters Default Command Mode Usage Information Example image cancel None Not configured EXEC This command attempts to cancel an active file download in progress. OS10# image cancel Supported Releases 10.2.0E or later image copy Copies the entire image in the active partition to the standby partition (mirror image). Syntax Parameters Default Command Mode Usage Information Example image copy active-to-standby active-to-standby - Enter to copy the entire image in the active partition to the standby partition (mirror image). Not configured EXEC Duplicate the active, running software image to the standby image location. OS10# image copy active-to-standby Supported Releases 10.2.0E or later System management 367