Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 253

S 2111:dddd:eee::22/12via 2001:db86:fff::2 ethernet1/1/1 1/1 00:01:24 View IPv6 information To view IPv6 configuration information, use the show ipv6 route command. To view IPv6 address information, use the show address ipv6 command. View IPv6 connected information OS10# show ipv6 route connected Codes: C - connected S - static B - BGP, IN - internal BGP, EX - external BGP O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2, E1 - OSPF external type 1, E2 - OSPF external type 2, > - non-active route Gateway of last resort is not set Destination Gateway Dist/Metric Last Change C 2001:db86::/32 via 2001:db86:fff::1 ethernet1/1/1 0/0 00:03:24 View IPv6 static information OS10# show ipv6 route static Codes: C - connected S - static B - BGP, IN - internal BGP, EX - external BGP O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2, E1 - OSPF external type 1, E2 - OSPF external type 2, > - non-active route Gateway of last resort is not set Destination Gateway Dist/Metric Last Change S 2111:dddd:eee::22/12via 2001:db86:fff::2 ethernet1/1/1 1/1 00:01:24 IPv6 commands clear ipv6 route Clears routes from the IPv6 routing table. Syntax Parameters clear ipv6 route {* | A::B/mask} • *- Clears all routes and refreshes the IPv6 routing table. Traffic flow for all the routes in the switch is affected. • A::B/mask - Removes the IPv6 route and refreshes the IPv6 routing table. Traffic flow in the switch is affected only for the specified route. Default Command Mode Usage Information Example Not configured EXEC This command does not remove the static routes from the routing table. OS10# clear ipv6 route * Layer 3 253