Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 126

lldp med network-policy (Interface) Attaches or removes an LLDP-MED network policy to or from an interface. Syntax Parameters lldp-med network-policy {add | remove} number • add - Attach the network policy to an interface. • remove - Remove the network policy from an interface. • number - Enter a network policy index number (1 to 32). Default Command Mode Usage Information Example Not configured INTERFACE Attach only one network policy for per interface. OS10(conf-if-eth1/1/5)# lldp med network-policy add 1 Supported Release 10.2.0E or later lldp med tlv-select Configures the LLDP-MED TLV type to transmit or receive. Syntax Parameters lldp med tlv-select {network-policy | inventory} • network-policy - Enable or disable the port description TLV. • inventory - Enable or disable the system TLV. Default Command Mode Usage Information Example Enabled INTERFACE None OS10(conf-if-eth1/1/3)# lldp med tlv-select network-policy Supported Releases 10.2.0E or later lldp receive Enables or disables the LLDP packet reception on a specific interface. Syntax lldp receive Parameters None Default Not configured Command Mode INTERFACE Usage Information Enable LLDP globally on the system before using the lldp receive command. The no version of this command disables the reception of LLDP packets. 126 Layer 2